english
Damping Material
Damping Material
AERO-FlexAERO-Flex
AERO-Flex

Specifications like the AERO Butyl. Black aluminum  with stamping, this results in a better flexibility, but with a little reduced stabilization effect.

Thicker butyl layer for better damping characteristic. Highly adhesive and very easily formable to irregular surfaces like door panels or roof interior.

Water restistant and hardly inflammable.

AERO-ButylAERO-Butyl
AERO-Butyl
Butyl and aluminum constrained layer damping material. Designed for damping metal or plastics and reducing unwanted structural vibration, rattles and sound from inside or outside of your car.
High efficiency to convert vibration to thermal energy. Highly adhesive and easily conform to irregular surfaces like door panels or roof interior.
Water resistant and hardly inflammable.
AERO-ExtremeAERO-Extreme
AERO-Extreme
Specifications like the AREO-Butyl but with reduced damping characteristic but highly stabilization effects. Perfect also to cover holes in the structure.
Water resistant and hardly inflammable.
AERO-MultiAERO-Multi
AERO-Multi

Similar in specification the AERO-Multi contains combination of AERO-Butyl and the AERO-Neoprene. It's the fast and cheap way to reach an almost perfect result of required noise reduction.
Water resistant and hardly inflammable.

AERO-WaveAERO-Wave
AERO-Wave
Rubber foam with a unique wave shape including adhesive back for ease of application, designed to absorb perfectly sound behind speakers e.g. in the door and in enclosures. Further can be used to decouple and isolate parts and can be compressed to get a perfect shape.
Water resistant and hardly inflammable.
AERO-FoamAERO-Foam
AERO-Foam
Rough foam absorption material with an adhesive back measuring 5mm in thickness. This product will absorb sound or/and to decouple vibration. It's like a gasket, e.g. behind your door panels, which can help to keep your musical experience free from any disturbances or noises.
Water resistant and hardly inflammable (but can absorb water).
AERO-PolyAERO-Poly
AERO-POLY
This Polyester acoustic damping product along with adhesive backed for use in an array of enclosure types or behind speakers (not suitable in wet areas).
It's especially useful in conjunction with midrange speakers. It's also possible to use to decouple and isolate parts.
Water resistant and hardly inflammable (but can absorb water).
AERO-NeopreneAERO-Neoprene
AERO-Neoprene
Consisting of, 6mm rubber foam absorption material with an adhesive back. To decouple and absorb vibration caused by the resonation characteristics of any panels. A typical application for damping would be the GLADEN SUBFRAMES in the trunk and other car audio applications where two hard surfaces are in contact.
Water resistant and hardly inflammable.
AERO-StoneAERO-Stone
AERO-Stone
This is a solvent free sound damping paste to minimize vibration and resonances in vehicle body panels, on wood, plastics or fiberglass parts. Can be applied via brush or spread with a squeegee in 2-3 mm thickness. Cures in about 5-6 hours by room temperature (calculate about 2 kilos per door).
Water resistant and hardly inflammable.
AERO-Fill
AERO-Fill
A ductile Butyl based product designed to seal all areas prone to leaks on speakers, door panels or other parts. Does not cure and sticks to all surfaces.
Water resistant and hardly inflammable.
(177inch / roll)
2-Door Kit Professional
2-Door Kit Professional
2 door starter kit, consisting of:

2x AERO-Multi 31,50x18,11x0,20inch

2x AERO-Butyl 31,50x18,11x0,07inch

2x AERO-Wave 9,84x7,87x0,79inch
2-Door Kit Standard
2-Door Kit Standard
2 door starter kit, consisting of:

2x AERO-Multi 31,50x18,11x0,20inch

2x AERO-Wave 9,84x7,87x0,79inch
scroll to top

GLADEN EUROPE GmbH Bertha-Benz-Str. 9, 72141 Walddorfhäslach Fax: 07127 8102899, CEO: Alexandra Gladen
Contact Service Impress